• Group assignment:
  • Use the test equipment in your lab to observe the operation of a microcontroller circuit board (as a minimum, you should demonstrate the use of a multimeter and oscilloscope)
  • Document your work on the group work page and reflect what you learned on your individual page

• Individual assignment:
  • Design a development board to interact and communicate with an embedded microcontroller

Learning outcomes

• Select and use software for circuit board design

• Demonstrate workflows used in circuit board design

Outcomes

Group assignment

Characterization

We start by characterizing the design rules for our Roland MDX 20.we used 0.4mm V-bit for the traces and 1.2 Endmill for the outline. We set the cutting speed for the to be 4mm/s, and we set the cutting speed for the outline is 2mm/s

https://fabacademy.org/2023/labs/egypt/group-assignments.html#8

Individual Assignment

I have learnt SMD Soldering and DE soldering

PCB Production

• I fabricated my pcb design using Roland MDX 20

  

• I Used double face to secure the FR1 PCB to the bed of the machine

• I imported my PNGs and set the tool diameter to calculated toolpath (V-Bit 0.4mm).

  

  

  

  • Set the original point for the tool

  

  • Generate the toolpath

    

  • Manufacturing

    

    

    

    

    Coding

    The code is simple it's a push button to turn on the LED each time get pushed

    Outcomes

    

    

    Files PCB Design :

    Week8_files.zip